Support Documents
XD10P Product Documentation The XD10P Cinema Audio Processor is out of production. The current XD10P Firmware (inside) the XD10P as seen in the "component information” screen of the XD10P Setup Software: PIC Firmware V 061215 Matrix Firmware V 050215 NR Firmware V 050325 EQ Firmware V 051025 - The current XD10P Setup Software (used on your PC) is V1.00.26. Please only use the current setup software when connecting to any XD10P The current XD10P Setup software and XD10P firmware files are available for download from this site at http://www.datasatdigital.com/support/documents/product-support/products/182-xd10p The setup software should be downloaded to and used on your PC. The firmware should be loaded onto the XD10P - see TN-F259 for details.
Sub-Folders:
-
-
-
XD10P Setup Software (for your PC)
- File Count:
- 2
- Sub-Folders:
- 0
The current XD10P setup software is V1.00.26.
The XD10P setup software runs on a PC. Connect the XD10P, which has a serial input, to your PC running the XD10P setup software. Verify that the com port used to connecct to the XD10P has been selected on your PC and its baud rate rate has been set for 38400. If your PC only has USB, then use an USB to serial adapter found at most electronics stores.
-
XD10P Firmware (inside the XD10P)
- File Count:
- 4
- Sub-Folders:
- 0
The current XD10P Firmware (inside) the XD10P as seen in the "component information” screen of the XD10P Setup Software:
PIC Firmware V 061215
Matrix Firmware V 050215
NR Firmware V 050325
EQ Firmware V 051025
- If you have a firmware update disc, the disc itself will be labeled V1.5 and will contain all the firmware mentioned above.
- The current XD10P Setup Software (used on your PC) is V1.00.26. Be sure to only use the current setup software when connecting to any XD10P.
- To download the current Setup Software program, see http://www.datasatdigital.com/support/documents/product-support/products/xd10p/292-xd10p-setup-software-for-your-pc and use "XD10 Setup Software Update Procedure."
